Precision Fastening Solutions

Contact Us: 01902 544480|sales@victoryfasteners.com

M14 × 1.5 × 150 mm grade 10.9 hexagon flange bolts DIN 6921

M14 Fine Thread Flange Bolts GEOMET 500A


M14 × 1.5 × 150 Grade 10.9 Hexagon Flange Bolts for GEOMET 500A Coating

Victory Fasteners manufactured M14 × 1.5 × 150 mm grade 10.9 hexagon flange bolts from stock DIN 6921 blanks, completing cutting, screw-cutting, deburring and full inspection.

Supported by 3.1 certification and mill certificates, the bolts were prepared ready for GEOMET 500A zinc flake coating.

Manufacturing from Stock DIN 6921 Blanks

Stock flange bolt blanks provided the starting point for the requirement, retaining the DIN 6921 hexagon head and integral flange configuration.

The blanks were cut to the required length, then screw-cut to produce the specified M14 × 1.5 mm fine thread. Deburring followed machining to remove burrs from the cut and machined edges.

Project DetailSpecification
ProductHexagon flange bolt
Nominal thread diameterM14
Thread pitch1.5 mm
Underhead length150 mm
Property class10.9
Blank specificationDIN 6921
Starting stockFlange bolt blanks
Machining operationsCutting, screw-cutting and deburring
InspectionFull inspection
Documentation3.1 certification and mill certificates
Specified finishGEOMET 500A zinc flake coating
Stage shownMachined and ready for coating


Fine-Thread Machining and Full Inspection

The 1.5 mm thread pitch formed a specific part of the component requirement, alongside the 150 mm underhead length and grade 10.9 material.

Following machining and deburring, the bolts underwent full inspection against the specified requirements before progressing to the coating stage.

The accompanying 3.1 certification and mill certificates provided the supporting material documentation for the order.

Prepared for GEOMET 500A Zinc Flake Coating

The machined components were prepared ready for the specified GEOMET 500A zinc flake coating.

This project brought together stock blank availability, machining, inspection and preparation for specialist finishing. Coordinating these stages through Victory Fasteners gives customers one point of contact for the component and its associated manufacturing requirements.

Contact Victory Fasteners to discuss bespoke flange bolts, fine-thread requirements or manufacture with specified surface treatments and certification.

Contact Victory Fasteners 

T: +44 (0)121 559 1244
E: sales@victoryfasteners.com
Ask a question

Victory Fasters Bespoke Bespoke
Victory Fasters Comprehensive Range Comprehensive Range
Victory Fasters Material Identification & Traceability Material Identification & Traceability
Mill Certificate & Traceability
Victory Fasters Single-source Service Single-source Service
Victory Fasters Tailored Solutions Tailored Solutions
Victory Fasters Test Certificates Test Certificates
Victory Fasters Traceability & Certification Traceability & Certification