M30 × 2 × 24 mm Class 12 Nut Manufactured to Customer Drawing

Bespoke High-Strength Nut Manufacturing with EN 10204 3.1 Material Traceability

Victory Fasteners manufactured an M30 × 2 × 24 mm Class 12 nut to a customer-specific engineering drawing, combining in-house machining capabilities with comprehensive material availability and controlled production processes.

The component required an M30 fine-pitch internal thread, a finished thickness of 24 mm and the mechanical properties associated with property class 12.

Manufactured from Stock Material

The nut was machined from material held within Victory Fasteners’ extensive stock inventory.

Maintaining a comprehensive selection of material grades and sizes supports a responsive manufacturing service, reducing reliance on external material lead times and helping the production team progress urgent and bespoke requirements more efficiently.

Premium European-origin material was selected to provide controlled alloy chemistry, consistent mechanical properties and full mill traceability.

In-House Manufacturing Operations

The component was produced through a controlled sequence of in-house engineering operations:

• Material cut to the required production length
• External profile milled to the customer drawing
• Centre drilled and prepared for threading
• M30 × 2 internal thread machined
• Component finished to a thickness of 24 mm
• Dimensional and thread inspection completed against the specified requirements

Keeping these processes under one roof provided greater control over production, inspection and delivery while giving the customer a single point of contact throughout the order.

Class 12 Performance

Property class 12 nuts are intended for demanding bolted assemblies where high proof-load capability is required. Accurate thread production, controlled material selection and dimensional conformity are therefore critical to the performance of the finished component.

The M30 × 2 fine-pitch thread was manufactured and inspected to ensure compatibility with the corresponding threaded component and the requirements of the customer drawing.

EN 10204 3.1 Certification and Traceability

The material was supplied with EN 10204 3.1 certification, providing documented confirmation of the material specification and applicable test results, validated by the manufacturer’s authorised inspection representative.

Full traceability connects the finished components with their originating material documentation, supporting quality assurance and record-keeping requirements.

This level of material certification is frequently requested for components intended for controlled and high-responsibility applications across sectors including:

• Oil and gas
• Aerospace
• Wind energy
• Construction and structural engineering
• Power generation
• Heavy engineering

Final suitability remains dependent upon the complete customer specification, application requirements and any additional testing or approval criteria.

Flexible Engineering from a Single UK Source

This project demonstrates Victory Fasteners’ ability to combine material availability, in-house machining, inspection and responsive customer service within one manufacturing operation.

From customer drawing through to finished component and certification, the requirement was managed through a single source supporting consistent quality, clear communication and dependable delivery.

Component: M30 × 2 × 24 mm nut
Property class: 12
Manufacturing basis: Customer drawing
Operations: Cutting, milling, drilling and internal threading
Material: Premium European-origin stock material
Certification: EN 10204 3.1
Traceability: Full material and production traceability

If you have an urgent or technically demanding industrial fastener requirement, contact the Victory Fasteners team to discuss the specification.

T: +44 (0)121 559 1244
E: sales@victoryfasteners.com