Precision Fastening Solutions

Contact Us: 01902 544480|sales@victoryfasteners.com

Victory Fasteners M33 × 300 Grade 10.9 Double-Ended Studs

M33 × 300 Grade 10.9 Double-Ended Studs


M33 × 300 Grade 10.9 Double-Ended Studs with Specified Impact Testing

Victory Fasteners manufactured M33 × 300 mm grade 10.9 double-ended studs from stock material selected to meet the customer’s impact-test requirements.

The self-colour studs featured 105 mm and 75 mm threaded ends, with a plain central section. Production involved cutting, screw-cutting and inspection.

Stock Material Selected for Impact Requirements

Alongside the dimensions and property class, the customer specified an impact-test requirement of 42 J at −20°C.

Suitable stock material with supporting impact-test results provided the starting point for manufacture. Material selection therefore addressed the customer’s testing requirement before machining began.

Project DetailSpecification
ProductDouble-ended stud
Nominal diameterM33
Overall length300 mm
Property class10.9
Thread lengths105 mm / 75 mm
FinishSelf-colour
Impact-test requirement42 J at -20°C
Starting materialStock material with specified impact-test results
Production operationsCutting, screw-cutting and inspection

Cutting and Screw-Cutting

The stock material was cut to length before screw-cutting the two threaded ends.

The 105 mm and 75 mm thread lengths were distinct features of the requirement, leaving an unthreaded central section between them. Manufacture followed these specified dimensions to produce the double-ended stud configuration.

Inspection Following Machining

Following cutting and threading, the studs progressed through inspection against the specified component requirements.

This stage brought the dimensional and thread requirements together with the material selection established at the start of the project.

Material Selection and Machining Through One Supplier

This project demonstrates Victory Fasteners’ ability to combine suitable stock material with machining and inspection for customer-specific stud requirements.

The supply route began with the required material properties and continued through production of the specified thread lengths and overall dimensions.

Contact Victory Fasteners to discuss double-ended studs, bespoke thread lengths or fasteners with specific material-testing requirements.

Contact Victory Fasteners 

T: +44 (0)121 559 1244
E: sales@victoryfasteners.com

Advanced Fastening Solutions Advanced Fastening Solutions
Victory Fasters Bespoke Bespoke
Victory Fasters Extensive Inventory Availability Extensive Inventory Availability
Victory Fasters Precision Manufacturing Precision Manufacturing
Victory Fasters Specialist Materials Specialist Materials
Victory Fasters Test Certificates Test Certificates