M36 × 3 × 130 Grade 10.9 Socket Head Cap Screws
M36 × 3 × 130 Grade 10.9 Socket Head Cap Screws
Victory Fasteners manufactured M36 × 3 × 130 mm grade 10.9 socket head cap screws through in-house machining of European-origin stock socket cap material.
The requirement combined a 3 mm thread pitch, a 130 mm underhead length and a DIN 912 socket head configuration, supported by 3.1 certification and mill certificates.
Manufacturing from Stock Socket Caps
Stock socket caps provided the starting point for this project. Using available European-origin grade 10.9 material allowed Victory Fasteners to carry out the required machining within our own facility.
This approach brings stockholding and engineering together, providing a practical manufacturing route for socket cap screws with specific dimensional and thread requirements.
| Project Detail | Specification |
|---|---|
| Product | Socket head cap screw |
| Nominal thread diameter | M36 |
| Thread pitch | 3 mm |
| Underhead length | 130 mm |
| Property class | 10.9 |
| Specified head configuration | DIN 912 |
| Starting stock | Socket caps |
| Material origin | European |
| Manufacturing | In-house machining |
| Documentation | 3.1 certification and mill certificates |
European Material and Supporting Certification
European material origin formed part of the project requirement, alongside the specified property class and dimensions.
The material was supported by 3.1 certification and mill certificates, providing documented information to accompany the fastener supply.
For customers with defined sourcing and documentation requirements, selecting suitable starting stock is an essential part of the manufacturing process.
In-House Machining to the Required Dimensions
Victory Fasteners completed the machining in-house to produce the specified M36 × 3 × 130 mm socket head cap screws.
The 3 mm pitch was a specific feature of the requirement. Together with the M36 diameter, 130 mm underhead length and grade 10.9 material, it defined the component to be produced.
Keeping machining within our facility enabled direct coordination between stock selection and production, with one supplier responsible for the manufacturing requirement and supporting documentation.
Socket Cap Stockholding and Machining
This project demonstrates how Victory Fasteners combines available socket cap stock, European-origin material and in-house engineering to fulfil specific fastener requirements.
Contact Victory Fasteners to discuss socket head cap screws with particular thread pitches, lengths, material origins or certification requirements.
Contact Victory Fasteners
T: +44 (0)121 559 1244
E: sales@victoryfasteners.com